Last Update:

You can trust our selection for Bearing Puller Kit Reviews. Because We have worked hard studying and analyzing 48816 reviews for Bearing Puller Kit and rating them. It was a difficult job to list only ten products for Bearing Puller Kit where thousands of them available online. I hope it will help you to take final decision for Best Bearing Puller Kit.

Best Bearing Puller Kit
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit9.8Check on Amazon
2Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit9.8Check on Amazon
3Bearing Puller Set, 5-Ton-Capacity Bearing Separator9.6Check on Amazon
4Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles - Wheel Bearing Remover Installer Tool Set for 0.75" 1" 25mm Bearings Compatible with Hogs from 20009.2Check on Amazon
5Shankly 5 Ton Capacity Bearing Pullers9.2Check on Amazon
6DAYUAN 23pcs FWD Front Wheel Drive Bearing Puller Removal Hub Removal Bearing Installer Installation Tool Kit9Check on Amazon
7Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Press Kit Puller Set Replacement Installer Removal Automotive Mechanics Tool Kit9Check on Amazon
8Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set - Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters9Check on Amazon
9Astro Pneumatic Tool 78825 25-Piece Master Front Wheel Drive Bearing Puller Removal & Installer Adapter Kit W/Grade 8 Drive Bolt8.4Check on Amazon
10Orion Motor Tech Rear Axle Bearing Puller Tool Set8.2Check on Amazon

1. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from 45# steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chrome moly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set’s expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer’s weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.

2. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit

  • DURABILITY, this bearing puller set features high hardness and toughness for optimal performance.
  • WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility.
  • EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
  • PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
  • PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.

3. Bearing Puller Set

  • EASY OPERATION: Includes everything you need for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles.
  • UNIVERSAL COMPATIBILITY: Includes heavy-duty, drop-forged 2” & 3” bar-type bearing splitters and 4” & 5” long hex push-puller legs so you can safely remove large or small bearings on front and rear wheel hub axle shafts without the hassle.
  • HEAVY-DUTY DURABILITY: Built with rugged drop-forged construction and heat-treated to withstand rigorous jobs, this bearing puller set is proven dependable for the long haul.
  • PROTECTIVE CARRYING CASE: Includes a custom-made ABS tool case with precision-sized slots for each component.
  • ALL-IN-ONE TOOL KIT: Includes 14-piece bar-type gear and axle bearing separator, 4-piece 4” (10cm), 4-piece 5” (12.

4. Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles - Wheel Bearing Remover Installer Tool Set for 0.75″ 1″ 25mm Bearings Compatible with Hogs from 2000

  • Compatible with Recent Harleys: This Orion Motor Tech wheel bearing puller tool kit is compatible with most Harley-Davidson motorcycles from 2000 to 2020, installing or removing their bearings in minutes.
  • Inclusive Set: Aside from your wrench, this wheel bearing kit provides everything you need—pullers, bolts, plates, & dowels—to service your machine’s wheel bearings, saving you time and money.
  • Quick & Easy Operation: This tool set installs and removes your hog’s 0.
  • Built to Last: Made of premium 45# stainless steel, this bearing installer and puller set provides strong and dependable long-term service; the threaded rods are further heat treated and blackened for greater strength and corrosion resistance.
  • Convenient Case: This bearing puller set comes with a blow-molded case, organizing the parts and keeping them easy to carry, store, and maintain.

5. Shankly 5 Ton Capacity Bearing Pullers

  • USEFUL BEARING SPLITTERS: Two of the most widely used and common bearing splitters (2 inches and 3 inch), helping the mechanic successfully complete a whole range of jobs.
  • VARIOUS PULLING JOBS: Shankly’s pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.
  • COMPLETE SET: Shankly’s bearing separator set comes with four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.
  • VERSATILE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool valuable for beginners and professionals alike.
  • DURABLE AND STRONG: Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.

6. DAYUAN 23pcs FWD Front Wheel Drive Bearing Puller Removal Hub Removal Bearing Installer Installation Tool Kit

  • Durable adapters made of steel with heavy duty plastic case.
  • Replace wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle
  • No more need for front end alignment after service work
  • Packaged in a custom case for easy storage and transportation
  • For front wheel drive cars and small trucks

7. Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Press Kit Puller Set Replacement Installer Removal Automotive Mechanics Tool Kit

  • ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation.
  • INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
  • ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
  • UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
  • PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.

8. Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set - Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters

  • SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8″ slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8″, 1-5/16″ to 2-3/8″, and 1-3/8″ to 2-7/8″ respectively to remove semi-floating rear axle bearings.
  • SUPERIOR DEPENDABILITY: This versatile slide hammer puller set is constructed from 45# structural steel for outstanding strength and durability; the hammer is chrome-plated, its yoke is galvanized, and each adapter is blackened to give you even greater performance, strength, and longevity.

9. Astro Pneumatic Tool 78825 25-Piece Master Front Wheel Drive Bearing Puller Removal & Installer Adapter Kit W/Grade 8 Drive Bolt

  • Includes heavy duty 7/8″ grade 8 drive bolt for twice the durability of the industry standard
  • Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service.
  • Master set for a wide range of applications
  • Black phosphate coating for a more durable finish
  • 25 piece set including detailed use instructions

10. Orion Motor Tech Rear Axle Bearing Puller Tool Set

  • BEARING PULLER SET: This 3-piece professional rear axle bearing removal tool set by Orion Motor Tech works with your 5/8″ slide hammer to let you quickly and easily pop out worn or damaged semi-floating rear axle bearings.
  • CONVENIENT DESIGN: Laser-etched markings clearly identify each of the three pullers in their custom carry case, while their rotary connectors give you easier access in narrow spaces.
  • SCRATCH-FREE SERVICE: The washers on our bearing pullers distribute your tool’s force evenly to provide sure grip and avoid the damage caused to bearings and casings by claw-type pullers.
  • WIDE APPLICATION: The small, medium, and large bearing pullers cover inner diameters from 1 to 1-7/8″, 1-5/16″ to 2-3/8″, and 1-3/8″ to 2-7/8″ respectively, covering the rear axle bearings used in the vast majority of domestic makes and models.
  • SUPERIOR DEPENDABILITY: Each of the 3 pullers is constructed from 45# structural steel for outstanding strength and durability; each piece is blackened with galvanized nuts to offer even greater longevity and corrosion resistance.

How To Choose The Best Bearing Puller Kit

Does the thought of finding a great Bearing Puller Kit stress you out? Has your mind been juggling between choices when it comes to buying Bearing Puller Kit in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bearing Puller Kit for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Bearing Puller Kit. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Bearing Puller Kit in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bearing Puller Kit currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Bearing Puller Kit brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bearing Puller Kit based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Bearing Puller Kit before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bearing Puller Kit they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Bearing Puller Kit, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bearing Puller Kit before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Bearing Puller Kit will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bearing Puller Kit if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bearing Puller Kit on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Bearing Puller Kit on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Bearing Puller Kit featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
Click Here to Leave a Comment Below 0 comments